My little Bantam

My little Bantam
D7 1966

Monday 12 December 2011

getting the clutch off

I used a bearing puller to get the clutch off.......it worked better than my clutch tool !
If you look close at the right hand side the puller it is slipping off as pressure is applied

1 comment:

  1. The reason that the clutch compresser tool is not holding on to the clutch drum whilst being compressed is because the legs chould be BEHIND the clutch sprocket NOT behind the drum as illustrated in the photograph!! Hope this is of some help and avoids any further problems!

    ReplyDelete